Next we place the plank templates on the new Larch planks. Always gut the planks to shape before planing this leaves the offcuts thicker for use elsewhere. Always leave some length on the planks if you have a problem with the scarf joint you can correct and move the plank along and cut the excess off when fixed to transom.
When fitting the top plank leave at least 1/2 inch on the top edge this will have a bevel on the top edge if you cut it exact it will get damaged when fitting the gunwhales it will be planed off when the gunwhale is fixed then a 2×1 and a 1/2inch chafe rail is fit to protect the plank, if it’s a working coble this top rail gets a lot of wear off the pot ropes and nets but is easier to replace than a gunwhale.
On the starboard side several frames and planks are replaced using the procedure as for port.
Page 12b.